




With the Antminer L11 Hydro 6U, Bitmain presented a water-cooled Litecoin miner in December 2025. Scrypt is its algorithm; besides Litecoin and Dogecoin, it can mine Bells, Junkcoin, Luckycoin and Pepecoin with it. Its hashrate is 33 GH/s. The machine consists of two rack units that weigh 49.1 kilograms together.
That is 172 joules per gigahash. Individual machines may land up to ten percent above or below these figures for hashrate and power draw.
The two units measure 698 x 483 x 87 mm (2U) and 796 x 483 x 176 mm (4U), together taking up six height units in the rack. The 2U unit weighs 25.7 kilograms and the 4U unit 23.4 kilograms; everything ships in one package of 973 x 637 x 522 mm weighing 60.3 kilograms.
The L11 Hydro 6U is cooled through a liquid circuit at 12 litres per minute and at most 2 bar, with connectors of 14 mm outer diameter. The loop takes antifreeze (pH 7.0 to 9.0), pure water (pH 6.5 to 7.5) or deionised water (pH 8.5 to 9.5). It may be operated at minus 20 to 45 degrees, and its noise level is 50 decibels. If it freezes where the miner is operated, antifreeze must go into the loop without exception.
It connects three-phase to 380 to 480 volts at 50 or 60 hertz and at most 12 amps, via an LP34 plug, plus an RJ45 socket at 10/100 Mbit/s for the network. Almost all of its 5,676 watts turn into heat in operation, which has to be carried away through the cooling circuit.
So far we have next to no experience with the L11 Hydro 6U. We do think, however, that the L11 machines are just as good as the Antminer L7 and the Antminer L9. The L9 Hydro, for example, convinced us; we have had extremely good experiences with it.
The yield at your tariff is determined by the Litecoin mining calculator. The cockpit tracks price and Litecoin network hashrate daily and lists the Litecoin pools. Its standing against devices for other coins is listed in the miner comparison.
When you buy mining hardware via Cryptohall24, you get a guarantee of 12 months In contrast to manufacturer warranties, our warranty only begins when the hardware is sold to our customers and not as soon as it leaves the factory. Since there can often be several months between production and sale in the mining market, our customers often have a longer effective protection than with the pure manufacturer's warranty.
Optionally, the hardware can be added to insured for up to 36 months become.

The process is clear and done in a few steps: you enquire about the device you want, you receive a written quote with the final price from us, and as soon as you accept it, we issue the invoice. After full payment is received, we trigger the order and the hardware is on its way to you.
That way you know where you stand at every point - from quote to delivery, a continuously supported process with a personal contact.
You can pay conveniently by bank transfer in euros, in crypto (Bitcoin or USDC) or in cash against a receipt.
As throughout our business, payment is in advance: we trigger the order as soon as payment has been received in full. That keeps the process clean and predictable for both sides.
Yes, discounts are possible for larger quantities. How large they are depends on several factors - the device, the quantity, the delivery location and the respective procurement conditions.
That's why we state the right price best directly in an individual quote. Just tell us the model and the quantity you want and we'll work it out for you.
On modern ASIC miners the power supply is built firmly into the machine and is therefore always included - it does not have to be bought separately. An external power supply only existed with very old first-generation models.
So you receive a ready-to-run device. Whatever else specifically belongs to the respective product is stated in the product description; in case of doubt we clarify it in the quote.
You can see availability directly on the product; in case of doubt we confirm it in the quote. The majority of our hardware is located in our main warehouse in Hong Kong and is shipped from there directly to your destination.
Individual devices are in stock in Germany (Hamm) - those reach you particularly quickly. We state the concrete delivery date bindingly in the quote, as soon as device and destination are clear.
We deliver worldwide. We handle the shipping and the complete import processing including customs clearance for you - you don't have to deal with it yourself. We state the shipping costs transparently in the quote.
That way the miner arrives ready to use at your place or the desired site. On request we deliver directly to our hosting, then the device goes into operation without a detour.
To operate at home or in your own business you mainly need three things: a suitable power connection (ASIC miners draw several kilowatts continuously, large devices often three-phase power), enough space with ventilation, and a stable internet connection via LAN.
On top of that come noise and waste heat: air-cooled devices are very loud and heat the room noticeably. Anyone who doesn't meet these requirements usually has the miner hosted - then we take care of power, cooling and operation.
Commissioning is straightforward: connect the device, plug it into the network and configure it to your mining pool and wallet. After that the miner runs around the clock.
We don't leave you alone with it - we support you with setting up pool and wallet and the first steps, even without prior experience. Your personal contact is available for questions.
As a German company we offer you 12 months' warranty on your hardware as standard.
Alternatively, you can exclude the warranty in the purchase contract and handle it via the manufacturer's warranty - then the device becomes cheaper. We offer both routes; which one makes sense for you we clarify in the quote.
Yes. You can buy the device from us and have it hosted in the same step - then it runs at a site with low-cost electricity, without noise and heat at your home.
For many this is the most economical way. You can read how hosting works on our hosting page.
We sell our devices to businesses (B2B). A statutory consumer right of withdrawal therefore does not apply in B2B business; in addition, we procure and import the hardware specifically for your order.
So you buy in a targeted and binding way. That's exactly why we calmly clarify the right device for your project before the quote - so you make the right choice from the start. If you have questions before buying, we are always reachable.